I heard this question how to build hydrogen fuel cell a lot of time from people who wants to save their many on gas. As you know gas prices hitting records each and every single day and it increases more in the future. There is no chance left to get down gas prices,therefore people are looking to build hydrogen fuel cell to convert their car to run using this amazing water fuel technology.
How to build hydrogen fuel cell yourself And what are the things needed?
You need:
Cut the platinum-coated nickel wire in two parts and wrap each piece into a tightly-coiled spring. Use the lead from the volt meter as a form to make the coil easily. Remove the 9-volt battery clip's leads, and strip the plastic coating from the ends of the wires. Twist the bare end of the red wire around the end of one of the coils of platinum wire and the black wire around the other. Attach the matching wires from the volt meter packaging by winding them around the same coil. Connect the black wire to the volt meter's negative terminal. Attach the red wire to the volt meter's positive terminal.
Then tape the electrodes to the Popsicle stick and tape the Popsicle stick to the water glass so they are almost completely in the water. The wire connections that were twisted cannot be in the water only the electrodes that are coated can be in the water.To run it you need to cause hydrogen bubbles to attach to one of the electrodes and oxygen bubbles to the other one. Touch the 9volt battery clip; this causes the water to split into oxygen and hydrogen. You will see bubbles while the battery is attached.
Know you now that how simple is this right? If you are still confused then get a guide which show you step by step instructions with video on how to build hydrogen cell yourself.These guides are easily available on internet they will show step by steps instructions with images too. Build your own hydrogen fuel cell to run your car on water and save your money.
